SMS command for GPS Vehicle Tracker GT06N to cut off/restore oil

Root Folder > Smarterping
In case the vehicle is stolen, the users can send SMS command to cut off the Petrol/Electricity to stop the vehicle from moving. Note: to ensure the safety of the driver and the vehicle, this command can only be used when GPS is located and driving speed is less than 20km/h or the vehicle is not moving. The users can also send SMS command to restore the Petrol/Electricity so that the vehicle can keep moving.


Cut-off Petrol/Electricity

Firstly, you should set a center number. Only center number can send the command to the device to cut off and restore oil. 

The format is: RELAY,1# 

After the command is carried out, it will reply “Cut off the fuel supply: Success!”. If the command didn't carry out, it will reply the reason about fail to carry out. 

Note: To ensure the safety of the driver and the car, this command is valid only under two conditions: the GPS is located; the speed is less than 20km/h, or the vehicle is not moving.

Restore Petrol/Electricity 

Only center number can send the command to the device to restore oil.

The format is: RELAY,0# 

After the command is carried out, it will receive “Restore fuel supply: Success!”
Article ID: 98, , Modified: 3/13/2019 at 5:49 PM

Was this article helpful?

Share this article