GENERAL SETTINGS |
S.No | Settings | New Commands |
1 | APN Setting | APN,APN’name# |
2 | Server Setting | 1 SERVER,1,DNS,Port,0# (With URL)
2 SERVER,0,IP,Port,0# (With IP) |
3 | GPRS Time Interval Setting | TIMER,interval time#
Interval time range: 10-18000s. Default as 10s. |
4 | Add SOS Number | SOS,A,No.1,No.2,No.3# |
5 | Delete SOS Number | 1 SOS,D, Serial No.1, Serial No.2, Serial No.3#
2 SOS,D,Serial No.1#
3 SOS,D,phone number# |
6 | Center Number Setting | CENTER,A,phone number#
Only center number can Cut-Off Petro |
7 | Delete Center Number | CENTER,D# |
8 | Oil Cut-Off | RELAY,1# |
9 | Restore Oil | RELAY,0# |
10 | Geo-fence | FENCE,ON,0,Latitude,longitude,radius,in/out# |
| | | FENCE,ON,0,0,0,radius,in/out#
If GPS is located, this sms means the latitude and
longitude is present location |
11 | Disable Geo-fence | FENCE,OFF# |
12 | Reboot Device | RESET# |
13 | Time Zone Setting | GMT,E/W,hours,minutes#
[Time zone(hours) range:0~±12 ; Time
zone(minutes) range:15/30/45] |
14 | GPRS Status Setting | Activate GPRS: GPRSON,1#
Disactivate GPRS: GPRSON,0#
Default as GPRS ON. |
15 | Voice-Monitor Delay | DELAY,time#
Time range: 5s-18s. Default as 10s. |
16 | Factory Setting | FACTORY# |
17 | Modify User Password | - |
18 | Alarm GPS Working Time | TIMESET,time#
Time range: 1-999mins. Default as 20mins |
19 | Sensor Alarm Time Setting | DEFENSE,time#
Time range:1-60mins. Default as 10mins |
20 | Sensor Detecting Time | SENSOR,detect time,alarm time#
Detect time range:0-300s
Alarm time range: 10-300s
SENSOR,0# to disable vibration alarm function.
|
CHECKING |
21 | Checking Software Version | VERSION# |
22 | Checking Parameters | PARAM# |
23 | Checking Simplify parameters | SCXSZ# |
24 | Checking GPRS Parameter | GPRSSET# |
25 | Location checking
(Get Coordinate) | WHERE# |
26 | Status | STATUS# |
27 | Location checking
(Get Google Map link) | URL# |
28 | Geo-fence status | SEEFENCE# |